// CQDX.ru

Sienna Highlights

• Now with customizable front panel, keycap and LED colors
• True kit – soldering required (about 40 hours to build boards, assemble, cal and test)
• Modular (start small, add modules as your budget allows)
• Wide selection of IF filters, plus the ability to slide the 2nd and 3rd IF filters back and forth against each other to create the effect of a variable width filter (see Filters page)
• World-class QSK performance – 10ms T/R turnaround time lets you hear between the dits at over 70 wpm with no audio thumps or clicks! See Rx Performance page). No funny business here. Use RIT/XIT/SPLIT all you want. No restrictions. No menu options to set. Just push the Full-break-in button on the front panel.
• Great Tx audio! Tx accepts unbalanced line (back panel) or balanced (front panel) mic inputs, both active simultaneously. Balanced preamp with selectable gain accepts low or high output mics. Compatible with 150-600 ohm mics. 12th-order crystal filter provides superior carrier and unwanted sideband rejection while preserving bass frequency response. Separate 7th-order 5kHz AM/ESSB filter also included. Tx IF shift available in menu. See new plots of Tx IMD on our performance page.
• Accepts an optional internal PC for digital modes, logging, whatever! WHY?
  (ChromaSound Audio DSP software provided free with purchase of the PC option. See www.barberdsp.com)
• Numerous usability features: alert when you try to transmit outside of your license privileges, keyer with choice of iambic A/B or Ultimatic mode, easy menu navigation, keyer controls on the front panel rather than buried in menus, simultaneous headphone and speaker usage with separate volume controls, many ways to change bands and frequency, 5 vfo memories per band, simple RIT/XIT with clear display of transmit and receive frequencies so you don’t accidentally transmit on top of DX that’s operating split, four velvet-smooth tuning speeds, much more!
• Full duplex transceive
• Transverter interface
• 455 kHz wideband IF Output drives panadapters such as the RFSpace SDR-IQ
  (Sienna is a supported radio in the SpectraVue software that comes with the SDR-IQ
• Remote controllable via RS-232 and works with popular rig control software

SIENNA STARTS AT $1199 FOR A REMOTE-CONTROL-ONLY RECEIVER KIT THAT’S FULLY UPGRADEABLE INTO A FULL-FEATURED TRANSCEIVER OR USABLE AS A SECONDARY RECEIVER!

• All models have CW, SSB, FM, 500kHz-30MHz, 1ppm TCXO, IF Out, NB
• All models also include a 4-pole 15kHz roofing filter, a 4-pole 2400Hz SSB filter at the 2nd IF and a 4-pole 20kHz ceramic filter at the 3rd IF
• Add up to 6 additional crystal/mechanical filters and high performance roofing filter for AM and improved CW, SSB receive performance
• Transceiver models include full duplex, all-mode transmitter, RF speech processor, transverter interface, linear control, keyer, A/B antenna
• PC models come with Audio DSP, USB, RS-232, PS/2, LAN, VGA, AC97 Sound; 1.06GHz Celeron with 1GB RAM, 8GB CF

Photo by dzkit.com

Sienna Model S-100X 100W transceiver shown with Heil PR-781 mic, Kent TP-1 paddles, 12-button keypad, monitor, wireless keyboard, USB mouse, and wireless USB hub. Ham Radio Deluxe freeware is shown on the display. This “faceless” model now includes the mic and headphone jacks.

10W TRANSCEIVER : $2098 (S-100L)
10W XCVR w/Tuner : $2287 (S-100E)
100W XCVR : $2497 (S-100H)
100W XCVR w/Tuner : $2686 (S-100X)

Be sure to also order the receive bandpass filter for the bands you want to use ($20/band, 11 bands, or $185 for the set).

Note: receivers can be upgraded to transceivers by adding the transmitter and other options, but also require a controller board upgrade, which adds $199. This extra cost has already been included in transceiver models.

OR GET A SIENNA WITH THE FRONT PANEL ALREADY INCLUDED:

Photo by dzkit.com

Sienna Model SF-100X 100W transceiver shown with Heil PR-781 mic, Kent TP-1 paddles, 12-button keypad, monitor, wireless keyboard, USB mouse, and wireless USB hub. Ham Radio Deluxe freeware is shown on the display. NOTE: This picture does not show the new white-on-black meter design using white LED backlighting.

RECEIVER : $1898 (SF-100)
10W TRANSCEIVER : $2797 (SF-100L)
10W XCVR w/Tuner : $2986 (SF-100E)
100W XCVR : $3196 (SF-100H)
100W XCVR w/Tuner : $3385 (SF-100X)

Be sure to also order the receive bandpass filter for the bands you want to use ($20/band, 11 bands, or $185 for the set).

Note: receivers can be upgraded to transceivers by adding the transmitter and other options, but also require a controller board upgrade, which adds $200. This extra cost has already been included in transceiver models.

Link