1.Turn the Power/Volume knob clockwise to turn the power on. When you turn
it on, it will beep and you will hear the voice prompt of the current channel.
2.Press and hold the monitor button, then rotate Power/Volume knob to turn
up and down the volume
1.Rotate the channel knob to choose your desired channel
2.When you receive a signal, the speaker will make a sound.
1.Press and hold “PTT” switch of earphone, then speak into the
microphone in normal speaking tone. Please keep the microphone
3-4cm away from your lip. to make sure good communication
with the receiver.
DAIWA CN-901-HP-3 SWR Meter CN-901HP with true peak power readout.
All Daiwa SWR meters can be selected to display average or peak power. The PEP value is found by different charge/discharge constants and therefore is not very...
ALPHA 4040 Antenna Tuner NOVEMBER TUNER UPDATE
Alpha 4040 DreamTuner
In the last 45 days, we’ve made a lot of progress on the Alpha 4040 DreamTuner. As you know, when we tested the tuner under full power, we discovered that...