RT-100 LDG has announced the RT-100 coming in September of 2013. The RT-100 is a 100 watt coax in / coax out remote tuner designed to be placed near the feedpoint of the antenna. If you are worried about power loss due to SWR in your feedline, the RT-100 is the answer. Place the RT-100 near the feedpoint and the virtually eliminate all feedline loss due to SWR.
The RT-100 is DC powered over the coax, so add your own DC injection circuit (bias-T) or use the LDG RC-100 to power and control the tuner from you shack. The RC-100 will provide DC power over the coax as well as control for Auto/Semi mode, Lock and force a Manual Tune.
0.1 to 125 watt power range (SSB and CW), 30 watt digital.
2000 memories for instantaneous band changing.
Powered over the coax.Weather resistant ABS Enclosure with Gaskets.
Tuning time: 0.1 to 6 seconds full tune, 0.1 seconds memory tune.
1.8 to 54.0 MHz coverage. Built-in frequency sensor.
Tunes 4 to 800 ohm loads (16 to 150 on 6M), 16 to 3200 ohms with optional 4:1 Balun.
For Dipoles, Verticals, Vs, Beams or any Coax Fed Antenna.
Includes U-bolt for pipe mounting.
Optional RC-100 Controller provides power and control to tuner..
Optional external Balun allows tuning of random length, long wire or ladder line fed antennas.
Icom IC-PW2 1kW HF+ 6m Amplifier
On August 31, 2019, Icom Co., Ltd. announced the IC-PW2 - 1kW linear amplifier in the HF + 50MHz band at its booth at Ham Fair 2019. Full power, full duty specification that uses LDMOS for the final...
HF/VHF/UHF SDR ICOM “IC-705” Transceiver A new HF +50/144/430 Mhz transceiver will be shown and announced on "HAM FAIR 2019" on August 31st (Sat) and 1st (Sun) September 2019 in Tokyo. ICOM "IC-705" 10 Watts of power with new SDR technology.
PTRX-7300 Panorama Adaptor for the IC-7300
A panorama adapter for the IC-7300? What's the point, you might ask, the IC-7300 has such a nice spectrum and waterfall display? Right, but unfortunately the IC-7300 has no output for an external display....