1 To 50W (Switchable)
The radio can be switchable the output power with 1W step,When talk range is small, the radio can be switched to low or middle power
PTT ID Encode (DTMF Decode and Encode)
It provides identification of radio to control center or radio with DTMF decode, it is quite useful for communication management. ENI will be sent when you press or release PTT button if this function is on.
512 Memory Channels
To quickly set the parameters on a radio, you can clone the radio data from another radio with the supplied data cable, saving the time of parameter setting.
Channel steps (2.5K/5K/6.25K/10K/12.5K/25K)
Different channel steps 5K/6.25K/10K/12.5K/25K is optional to confirm with the different need.
136-174 & 300-350 MHz (TX/RX)
136-174 & 350-390 MHz (TX/RX)
136-174 & 400-470 MHz (TX/RX)
136-174 & 450-520 MHz (TX/RX)
136-174 & 245-246 MHz (TX/RX)
144-146 & 430-440 MHz (TX/RX) (Frequency Range Can Be Suitable For Different Countries Or Area)
Press the preset emergency key to emit emergency alarm, or send ENI or background noise to pre-defined person.
Different channel spacing 25KHz/12.5KHz is optional to confirm with the regulations of different countries.
CTCSS / CDCSS
Unique CTCSS /CDCSS is useful to setup group users to avoid unwanted conversations on the same channel.
Frequency and various features can be set by PC programming software.
Icom IC-PW2 1kW HF+ 6m Amplifier
On August 31, 2019, Icom Co., Ltd. announced the IC-PW2 - 1kW linear amplifier in the HF + 50MHz band at its booth at Ham Fair 2019. Full power, full duty specification that uses LDMOS for the final...
HF/VHF/UHF SDR ICOM “IC-705” Transceiver A new HF +50/144/430 Mhz transceiver will be shown and announced on "HAM FAIR 2019" on August 31st (Sat) and 1st (Sun) September 2019 in Tokyo. ICOM "IC-705" 10 Watts of power with new SDR technology.
PTRX-7300 Panorama Adaptor for the IC-7300
A panorama adapter for the IC-7300? What's the point, you might ask, the IC-7300 has such a nice spectrum and waterfall display? Right, but unfortunately the IC-7300 has no output for an external display....