The switch is designed specially to be used for remote (over the Internet ) controlled systems, but can of course be used in other applications also. The switch can be manually controlled via an internal web interface. Together with Remoterig RRC-1258 it can be setup to automatically follow your band changes. The switch connects to the RRC over IP, no serial port is needed. Normally it is powered with 48V via the Ethernet cable according to the PoE standard. This means that the switch can be placed in a tower 100m from the schack. The switch is built in stainless steel and can be placed outdoor. It can be ordered with N-connectors or SO-239 both with PTFE dielectric.
Frequency Range: 1,6-55 MHz
Characteristic impendance: 50 ohm
Supply voltage PoE (IEEE802.3af): 48V
Supply voltage Local: 12-15V
Power consumption PoE: 60 mA
Power consumption Local: <200 mA
Connectors: PTFE dielectric N or SO-239
SWR (1.8-50 MHz): <1.1:1
Insert loss (1.8-30 MHz): <0.03 dB
Insert loss (50 MHz): <0.05 dB
Power rating (1.8-30 MHz, SWR <1.3:1) 5kW
Power rating (1.8-30 MHz, SWR <2:1) 2.5kW
Power rating (1.8-30 MHz, SWR <3:1) 1.5kW
Ethernet connection(*2): RJ45 or 10 pos terminal
Mast clamps: Stainless Steel 51mm
Operating temp: -40 -+60 C
Dimensions (WxDxH): 200x155x140mm
Weight: 0.5 Kg
(*1) All unused antenna outputs are grounded, The RF card control lines are surge protected with Metal Oxide Varistors
(*2) The control cable should be shielded (FTP) CAT-5e or better.
DAIWA CN-901-HP-3 SWR Meter CN-901HP with true peak power readout.
All Daiwa SWR meters can be selected to display average or peak power. The PEP value is found by different charge/discharge constants and therefore is not very...
ALPHA 4040 Antenna Tuner NOVEMBER TUNER UPDATE
Alpha 4040 DreamTuner
In the last 45 days, we’ve made a lot of progress on the Alpha 4040 DreamTuner. As you know, when we tested the tuner under full power, we discovered that...