This OS X program is used for the ICOM IC-746PRO, or here in europe better known as IC-7400.You can edit all the setting and write it to file for later use.
There is no documentation yet, I think it is selfexplained. Only few words to the slider at the button. Move it further to the right, when you get communication failures via the serial port. For G4@1.33Mc Powerbook it use the default. On a Pentium4@3.4Mc under Windows set the slider to the center.
Use the default address for the 746 is $h66 and set your COM port using the ‘Preference’ menu.
MacLoggerDX Version 6.05
Organizing and filtering the spots from your favourite DX Cluster for DXing, casual Contesting or rag-chewing. MacLoggerDX supports close to a hundred radios, automatically tuning to the spots you are interested...
MacLoggerDX Version v6.04b39
Updated to: Version v6.04b39
Requires OS X 10.9+.
macOS 10.12 (Sierra) compatible.
Added 2D Map VUCC Grid square overlay.
Added Bands worked/confirmed to VUCC awards table.
MacLoggerDX Version 6.02b
OS X 10.9+ and Intel 64 bit Processor.
Added prosign elision to DTR/RTS CW Keyer.
Added File menu Show Log command.
Added File menu Compress Log command.
Added Labels margin...