RIGrunner is the most convenient and safest way to connect all of your 12 volt equipment to a power source. The 4010S is the only power strip that has FET controlled automatic or manual on/off switching. Whatever radio is plugged in to the master jack automatically controls power switching of nine switched outlets. It uses the excellent Anderson Powerpole connectors, standardizing all of your 12 VDC connections.
40 amp 12 VDC continuous duty with 10 outlets – one always on “Master” outlet and nine switched outlets
Switched outlets controlled by 90 amp rated FET with temperature and over-current protection
Three position control switch turns switched outlets on, off or enables automatic operation
Precision voltage monitoring with visual/audible alarm for over and under voltage
Overall Dimensions (maximum, w/o cables) 1.4″ H x 11.75″ W x 3.0″ D
Weight 15 1/4 oz.
Maximum total current 40 amps
Maximum single individual outlet current 40 amps (fuse protected)
4010S Automatic switching threshold. Most radios with appropriate master outlet fuse.
Built in USA to IPC-610 commercial manufacturing standards by an ISO9002 facility.
Printed circuit board .062 FR4 material, extra heavy 3oz. copper, with greater than 1″ wide high current traces.
Double sided, plated through holes, solder mask over bare copper, silk screened commercial grade printed circuit board.
Enclosure: .062 aluminum, with attractive and extremely durable powder coat painting and clear silk screen labels.
Power connectors: exclusively Anderson Power Products Powerpoles®.
Connectors are arranged according to the ARES/RACES standard (see our links).
Fuses installed are standard ATC/ATO automotive fuses available in 10 values from 1 to 40 Amps.
Stainless steel hardware with PEM™ threaded mounting standoffs.
DX-Patrol Converter for OSCAR-100 DX-Patrol Uplink Converter for OSCAR-100 (QO100) Geos. Satellite.
434MHz to 2400MHz Low Cost (~100 EUro) Up convertor with 100mW of RF Power to "QO-100" Satellite.
Source (Link) to DX-Patrol Company
DAIWA CN-901-HP-3 SWR Meter CN-901HP with true peak power readout.
All Daiwa SWR meters can be selected to display average or peak power. The PEP value is found by different charge/discharge constants and therefore is not very...