Blueline ECO750 – Most modern components and a highly efficient layout design result in lower thermal power loss. This power amplifier works according to the Doherty principle with an up to 20 % higher efficiency factor.
This amplifier uses especially efficient LDMOS semiconductors from European manufacturers, providing both energy efficiency and high amplification. Because of the compact but robust design the amplifier is suited for mobile and stationary applications as well. For mobile use or during contest operation the high efficiency layout will be especially useful of course. But also at home you will benefit from it.
The benefits of the Blueline ECO750 at a glance:
Robust, solid workmanship
High overall efficiency, typ. >70%
Protection circuits against mismatch, clipping and excessive heat
Especially suited for digital modes (WSJT)
Built-in electronic sequence control with remote powering of external preamplifiers
additional time shifted PTT for transceiver
Microprocessor operated final amplifier, integrated programmable
Sequenzer, PTT control selectable, positive or negative, Input over-
voltage protection, USB CAT interface
144 -148 MHz incl. USA band
Output power: 750 Watt PEP at 50 Ohm, at 45 Volt DC
Drive power: 5 Watt PEP (QRP Transceiver)
Harmocic suppression: -80 dB
Amplification: >17 dB
IM to PEP: ca. -35 dB
Power suppy requirements:
DC 45-48 Volt, Minus pole to housing
Power consumption: ca. 23 Amp. for 750 Watt PEP SSB
Efficiency: Peak 70 %
6dB Back off: >40 %
HF Input: N socket, 50 Ohm, VSWR < 1,3 : 1
HF Output: N socket, 50 Ohm
Cooling by temperature-controlled fan
Display: TFT active touch, operation voltage,
excessive temperature (-shut down),
drive power, output power, forward and
Power Supply: External 120-240V / 48 V / 1,3 kW switching-mode PS
Icom IC-PW2 1kW HF+ 6m Amplifier
On August 31, 2019, Icom Co., Ltd. announced the IC-PW2 - 1kW linear amplifier in the HF + 50MHz band at its booth at Ham Fair 2019. Full power, full duty specification that uses LDMOS for the final...
High power HF combiner OM10C The high power combiner OM10C is designed for all short wave amateur bands from 1.8 to 29.7 MHz and maximum 10kW PEP output power.
Specification of OM10C:
OM4001A HF Linear Amplifier The OM Power model OM4001A is an automatic power amplifier, designed for use on all short wave amateur bands from 1.8 to 29.7 MHz (including WARC bands) and all modes. It is equipped with a two pieces...