Photo by kd1jv
80, 40, 30, 20 and 17 or 15 meter operation (17 or 15 meters selected at time of building)
DDS VFO for wide tuning range with crystal stability, 50 Hz tuning steps.
Single step or auto increment tuning
Sensitive, 0.2 uV receiver with very low internal noise for exceptional S/N ratio.
Selective CW filter with 4 crystal IF filter and audio band pass filter
Side adjust volume control for low profile case
Audio derived S Meter bar graph
Audio derived AGC
Easy to use push button operation
LCD display with back lighting
Last used frequency restored when changing bands
Stores last used frequency and other operating parameters when turned off.
Battery saving auto shut off if not used for 15 minutes (can be disabled)
4.5 to 5 Watt transmitter output on all bands (with 12 volt supply)
2.5 watts output typical with 9 volt supply
– 43 dBc max spurious output
Built in Iambic A or B mode keyer with three message memories
Can convert Morse inputted via paddle to transmit as PSK31.
50 ma no signal receive current
680 ma maximum transmit current at 12 volts
6 to 12 volt supply required
Custom made aluminum case, painted and silk screened
Small size, 4.9″ wide, 2.7″ deep, 1″ tall (about 1/3d larger than an Altoids tin)
Light weight, 6.3 oz.
For Price & Order Click Here