add to bookmark Bookmark | Register | Log in

// QRO & QRP






High power HF combiner OM10C




29
Nov

QRO/QRP
0 Comment
Tags: ,,,,,,,
Date: 29 Nov 2018
The high power combiner OM10C is designed for all short wave amateur bands from 1.8 to 29.7 MHz and maximum 10kW PEP output power.   Specification of OM10C: Frequency coverage: 1.8 – 29.7 MHz continuous Power rating: 10 kW PEP or continuous carrier into a matched load (VSWR below 1.2:1). Reduce the output at increased VSWR, linearly down to 5 kW at VSWR up to 2:1 Input...

Continue Reading »



OM4001A HF Linear Amplifier




28
Nov

QRO/QRP
2 Comments
Tags: ,,,,,,,
Date: 28 Nov 2018
The OM Power model OM4001A is an automatic power amplifier, designed for use on all short wave amateur bands from 1.8 to 29.7 MHz (including WARC bands) and all modes. It is equipped with a two pieces of ceramic tetrode FU728F.   The advantages of OM4001A: Full compatibility with - ICOM - YAESU - ELECRAFT - Ten-Tec Orion - Kenwood - Icom transceive protocol using by microHAM...

Continue Reading »



BURST-2000A LDMOS Power Amplifier




26
Nov

QRO/QRP
5 Comments
Tags: ,,,,,,,
Date: 26 Nov 2018
"BURST-2000A" - Russian LDMOS HF Linear Power Amplifier - 2,2 KWT. 1.8 - 50 MHz. with (CWS) cooling water system. Video (Russian Language) httpvh://youtu.be/WcTO8SejTCM Exclusive photos (Copyright CQDX.ru) Exclusive photos (Copyright CQDX.ru) Exclusive photos (Copyright CQDX.ru) Exclusive photos (Copyright CQDX.ru) Exclusive photos (Copyright CQDX.ru) The...

Continue Reading »



OM1000+ HF and 50 MHz Amplifier




07
Nov

QRO/QRP
1 Comment
Tags: ,,,,,,,
Date: 07 Nov 2017
The linear amplifier OM1000+ is designed for all short wave amateur bands from 1.8 to 29 MHz (including WARC – bands) + 50 MHz and all modes. It is equipped with a ceramic tetrode GS-23B. Specifications: Frequency coverage: Amateur bands 1.8 – 29.7 MHz including WARC + 50 MHz Power output: 1200+W PEP in SSB, 1000W CW on HF bands, 1000W PEP SSB, 800W CW on 50 MHz, ...

Continue Reading »



OM10C high power HF combiner




12
Oct

QRO/QRP
0 Comment
Tags: ,,,,,,,
Date: 12 Oct 2017
The high power combiner OM10C is designed for all short wave amateur bands from 1.8 to 29.7 MHz and maximum 10kW PEP output power. Frequency coverage: 1.8 – 29.7 MHz continuous Power rating: 10 kW PEP or continuous carrier into a matched load (VSWR below 1.2:1). Reduce the output at increased VSWR, linearly down to 5 kW at VSWR up to 2:1 Input impedance: 50 Ohm unbalanced, input UHF SO239...

Continue Reading »



ACOM A1200S HF Linear Amplifier




27
Sep

QRO/QRP
0 Comment
Tags: ,,,,,,,
Date: 27 Sep 2017
FEATURES: Five inch (5”) (108x65mm) high resolution color display, 800x480 pixels and 24-bits colors. The final stage uses field effect (MOSFET) transistors type BLF188 from NXP, designed to withstand high mismatch (SWR) at the output and intended for operation in aerospace, industrial, mobile, and radio broadcast applications. Compatible with all transceiver models available...

Continue Reading »



SPE Expert 1.5K-FA Linear Amplifier




05
Jul

QRO/QRP
0 Comment
Tags: ,,,,,,,
Date: 05 Jul 2017
Specification: 300W • -60dB Powerful: solidc 1.5kW in on on all modes. Very Light: about 10 kgs (about 22 lbs). Very Small: H 12, W 28, D 36 cm. (4.72" X 11.2" X about 17", connectors included). Wide Frequency Coverage: 1.8 mHz to 54 mHz, including WARCs. Where permitted: 60m. full power and 300W on 4m. (70mHz). Internal Switching Power Supply with Power Factor Correction. ...

Continue Reading »



Palstar LA-1K 1 kw LDMS Solid state amplifier




28
May

QRO/QRP
0 Comment
Tags: ,,,,,,,
Date: 28 May 2017
RF Sensing 1000 Watt Amplifier covering 160m to 6m bands with LCD touch-screen display to control the amplifier. Output Power 1000 Watts PEP CW ICAS Frequency range 1.8 to 54 MHz Color Touch Screen allows access to all functions Output 3 RF SO-239 ALC Exciter Power Control Gain 14 db RF Sensing Auto Band Switching RF Output Vacuum R/T Switching Power supply: Internal...

Continue Reading »