HF Linear Power Amplifier Pallet 300 Watt P.E.P Designed for HF – VHF Broadcast and Ham radio Bands this Linear Amplifier incorporates transmission line transformers technology and MOS-FET device to enhance ruggedness and reliability.
PHV305 is an RF Power Amplifier designed for the HF Broadcast or Ham Radio Bands transmitters or power amplifiers. PHV305’s output power is 300 Watt P.E.P. minimum at 50 Ohm load in the range
of 1.5 – 30.0 MHz and 250 Watt P.E.P. in the range of 30.0 – 54.0 MHz. This PA amplifies the input RF signal typically by 18dB, note that there is on board a 3db attenuator that can be removed in order to increased the gain by 3db it operates at 50V / 13A max. The operating class is AB and the quiet current is 1.0A. The Amplifier consists of one Push-Pull amplifying stage with active
component a MOSFET BLF278 or MRF151G or equivalent.
ACOM-2020S PA in details
Easy to operate
The overall operation of ACOM 2020S is extremely simplified: the touch screen menus are intuitive and easy to follow, no special skill is required from the operator when changing frequency...
ICOM IC-PW2 1 KW HF Linear Amplifier httpvh://youtu.be/x3qQQP22VVY
Take your contesting experience to the next level with the latest LDMOS power device with features supporting a SO2R operation in one amplifier.
RF-KIT “B26 RF2K+” HF Linear Amplifier
Output Power 1.8 – 30 MHz 2K+, 6m 1K+
Device: 2x BLF189XR
Auto Band Selection
ICOM®; YAESU® Band data Interface