High performance phase locked loop frequency synthesizer kits. Assembly manual on CD included - 3000 - 3450 Mhz frequency synthesizer kit - Can be programmed between 3000 MHz and 3500 MHz.
- Assembly manual on CD included
- 3000 - 3450 Mhz frequency synthesizer kit
- Can be programmed between 3000 MHz and 3500 MHz
- Fractional-N Synthesizer
- 2" x 1.5"
- 10 MHz reference input
- SMA connectors...
The FG085 is a low cost yet versatile function generator capable of producing signals of many common waveforms. As an easy-to-use tool operation of FG085 is very simple and straightforward. It is an ideal test/experiment tool for electronic hobbyists and students.
This is the kit version of FG085. All SMT parts have been pre-soldered on PCB. MCUs on board have been pre-programmed. Through-hold...
The MST (Minimalist Sideband Transceiver) is an easy to build and fun to use single sideband QRP transceiver for the 40M or 80M amateur bands. The MST transceiver follows a minimalist design making it inexpensive and simple to build yet still delivering excellent performance and being a pleasure to operate.
The MST PCB contains a complete transceiver except for a VFO. You can add a VFO of your...
The ultimate QRSS Transmitter Kit is produced by Steve G0XAR and Hans G0UPL in 30, 40 and 80m versions.
The kit contains the PCB, LCD, programmed microcontroller and all board-mounted components. Download the instruction manual using the link above. The PCB is quite compact and moderate care is required in the construction. A rich array of functionality is provided by the design; please read the instruction...
Overview
OpenBeacon is an open source crystal-controlled QRPp beacon transmitter kit which can output a variety of slow-speed modes, including QRSS, DFCW, and Sequential Multi-tone Hellschreiber. It is configured via USB port, so there are no jumpers to set and you can easily adjust all of the operating parameters via command line. Once configuration is complete, OpenBeacon may be removed from...
The PMSDR is a small, low-cost, HF bands full coverage "Software Defined Radio" receiver that use a computer USB port and delivers I-Q audio signals to the PC's sound card and one of the few SDR-receivers with full coverage from 0,1 to 72 MHz. It was designed by Martin Pernter IW3AUT and it's similar to the "SOFTROCK XTALL project", but with some improvements and many features. This way a great many...
What is nanoKeyer? The nanoKeyer is an Arduino Nano based CW Contest Keyer Addon.
It was designed specifically for use with the K3NG Arduino keyer open-source firmware adding many features and flexibility.
The nanoKeyer is suitable as a standalone keyer or for keying the radio via the USB port by using the K1EL Winkeyer protocol from a connected computer and your favoured contest logging...