FM+ is a 87.5?108 MHz broadcast band converter expressely designed for the Perseus receiver. It features a very good dynamic range which perfectly matches the Perseus receiver. The converter is equipped with a control software application suited for FM DXers needs. The FM+ is equipped with an internal antenna switch for direct connection to an HF antenna when the converter is not used.
Receive Converter from V/UHF to the 10m Band, ideal for SDR (Software Defined Receivers) and all other receivers.
With the down converters DCM-2 and DCM-70 you can extend the frequency range of your receiver, whether SDR or conventional. Use all the benefits of your NetSDR, SDR-IQ or Perseus receiver not only on shortwave, but also on VHF and UHF. The DCM-2 converts the 2m band to 10m, the DCM-70...
Client/Server Architecture for Remote Operations over Local or Wide Area Networks
Please read carefully the file Client-Server Perseus Software Reference - EN02.pdf provided with this distribution for a detailed description of the new network features of the Perseus client and server software.
• Decimation filters alias image rejection has been raised to 150 dB.
Heard T31A DXpedition by SDR receiver "Perseus" Network on 40m by CW from Australia. He used QSX 2-3 KHz up with a huge pile-up from VK and ZL. For Europeans (not Big Gun's) it was too late.
The most sensitive place in the SDR receiver Perseus is a Voltage Regulator.
After an unsuccessful attempt to connect another power supply to SDR Perseus, receiver suddenly flashed all the lights and stopped working. Acrid smoke filled the room...
As a result - an explosion of the capacitor 220UF/10v in the Voltage Regulator.
Below is changes with a new pair 220UF/25v capacitors.