Tag " QRP"
06
Apr
Photo by Youkits
Photo by Youkits
DDS controlled, Minature LCD display with frequency
Power: 5W output
Kit A TX: 5-15MHz, covering 60m, 40m, 30m, 20m band RX:3-18MHz
Kit B TX: 18-30MHz covering 17m,15m,12m,10m band RX:14-30MHz
1Hz, 10Hz, 100Hz, 1KHz, 10KHz, 100KHz tuning rate available
Dual VFO with 40 memories
Memory transfer to VFO
One tuning knob plus 4 keys to realize all functions...
Continue Reading »
Continue Reading »
15
Feb
Chinese X1M is portable QRP dual-mode (ssb / cw) HF transceiver.
Features:
Transceiver: X1M [v2.01]
Frequency range: 0.1 ~ 30mhz transceiver;
Modes: ssb / cw (AM as optional);
Power output: 5 Watts (max);
Operating voltage: minimum 9.6v (dc), the highest 14.5v (dc);
Operating current: 0.35a (min), 1.2a (max);
Preamplifier;
Memory 100 channels ;
RIT function;
Automatic internal...
Continue Reading »
Continue Reading »
29
Jan
Frequency range:
RX: 0.5 ~ 30Mhz, 50 ~ 55Mhz.
TX: 0.5 ~ 30Mhz, 50 ~ 55Mhz.
Mode: SSB / CW / NFM / AM / RTTY (AM receive only).
Receiving sensitivity: better than 0.3uV.
Operating voltage: 9 ~ 20VDC.
Transmitting power: maximum output of 20W, the segment average, power is continuously adjustable.
Receive Current: 0.42A @ Min.
Emission current: 4.5A @ Max.
Hand microphone interface:...
Continue Reading »
Continue Reading »
25
Dec
Description:
Ten-Tec has created another legend within the new 539 Argonaut VI. This "NEW" QRP transceiver incorporates the use of Ten-Tec's ASR design philosophy. This same low noise receiver design blended with advanced software control has been used with the 599 Eagle and RX-366 receiver giving you outstanding dynamic range and crystal clear audio.
Tired of extended long menu driven transceivers....
Continue Reading »
Continue Reading »
03
Dec
MX-P50A hf power amplifier for QRP transceivers. Can be used both as a base and mobile unit, Extremely Small Compact and light weight, Full integration with the FT-817 using the supplied interface cable.
The amplifier incorporates various protection circuits such as high VOLTAGE,front mounted LED display.
This amplifier can be successfully used with other QRP rigs such as the ICOM IC-703(and...
Continue Reading »
Continue Reading »
30
Aug
The MST (Minimalist Sideband Transceiver) is an easy to build and fun to use single sideband QRP transceiver for the 40M or 80M amateur bands. The MST transceiver follows a minimalist design making it inexpensive and simple to build yet still delivering excellent performance and being a pleasure to operate.
The MST PCB contains a complete transceiver except for a VFO. You can add a VFO of your...
Continue Reading »
Continue Reading »
28
Jul
The ultimate QRSS Transmitter Kit is produced by Steve G0XAR and Hans G0UPL in 30, 40 and 80m versions.
The kit contains the PCB, LCD, programmed microcontroller and all board-mounted components. Download the instruction manual using the link above. The PCB is quite compact and moderate care is required in the construction. A rich array of functionality is provided by the design; please read the instruction...
Continue Reading »
Continue Reading »
