CN-901HP with true peak power readout.
All Daiwa SWR meters can be selected to display average or peak power. The PEP value is found by different charge/discharge constants and therefore is not very precise.
In contrast to that the new CN-901HP has a true, active peak envelope power (PEP) reading which is important for PSK31 and other digital modes. This function requires an external 12V DC power...
Description:
1.8-200MHz and 140-525MHz simultaneously measured on two separate meters
Full color lighted cross needle display reads FWD, REF, and SWR simultaneously
Switchable peak and average reading
Power Range: 30/300/3kW (1.8-200MHz) and 20W/50W/200W (140-525MHz)
Input loss: Less than 0.2dB
Monitor connection (BNC), 30dB attenuated for connection to a station monitor or frequency counter...
Will be available in March 2012
RigExpert AA-1000 is a powerful antenna analyzer designed for testing, checking, tuning or repairing antennas and antenna feedlines.
Easy-to use measurement modes, as well as additional features such as connection to a personal computer make RigExpert AA-1000 attractive for professionals and hobbyists.
The following tasks are easily accomplished by using this...
New! HM-17 SWR Meter kit is rugged, requires no power supply, and handles 1W to 1KW(CW) on HF/6M!
We looked around for a good, "no-frills", inexpensive SWR meter and couldn't find any that were made in the U.S. with the features we wanted (high power handling, accurate, sturdy, tip-resistant, good looking). So we made our own, and now you can too! The HM-17 requires only 3 hours to build, costs...
Monitor 4 sensors simultaneously for peak, Average power and coax SWR.
Direct USB full speed interface.
Backlit LCD display for stand-alone operation- Your PC is optional.
Oscilloscope and Spectrum Analysis of the RF Modulation- Observe IM and "Splatter" frequency components realtime.
Complete system includes (1) sensor, WN-2 unit, AC power module and software on CDROM.
Wide range of sensors...
Made in Russia
Portable and easy to use SWR meter. The power up to 60 MHz and 200 watts.
Correctly measure and low power 0.1-5 watts. Fully self-contained - the inclusion of the line lights, auto power off,
small size, convenient for trips, QRP stations, quick control.
The frequency of 1.6-60 MHz
SO-239 Plug
SWR 1 to 19
Power to 200 Watts
size 66h - 68h - 37mm
Power supply 3 AAA batteries
Weight:...
The mini-VNA Pro BT is a furthr development of the worldwide highly acclaimed mini-VNA Network Analyser. The most prominent enhancements are a built in LiIon battery and the new Bluetooth interface. Both enhancements allow you to use the mini-VNA Pro BT ouitdoors, directly at the base of the antenna.
Further functions and technical data of the mini-VNA Pro BT
* Frequecy range 0.1 to 200MHz
*...