![\"\"](\"https:\/\/www.cqdx.ru\/ham\/wp-content\/uploads\/2011\/04\/107-555x302-1.jpg\")
<\/p>\n<\/p>\n
Model 1254 combines the satisfaction of the kit building experience with the performance features expected in a modern HF receiver. Building one\u2019s own receiver from a kit has launched countless thousands of people into communications careers or the hobbies of amateur radio and shortwave listening (\u201cSWLing\u201d). You will build a true dual-conversion superhet with a microprocessor-controlled frequency synthesizer. Digital LED readout. Alignment is easy and does not require complicated equipment. You only need a volt-ohm meter and your ear; the kit provides its own 45 MHz test signal. Project skill level: Intermediate. Not recommended as a first-time kit building project. Estimated build time: 15-20 hours.<\/p>\n
\n
\n
Frequency coverage: 100 kHz – 30 MHz
\nModes: AM, SSB, CW
\nClarifier control for +\/- 1.5 kHz SSB\/CW fine tuning between 2.5 kHz steps
\nFront panel controls: ON\/OFF switch, Tuning, Volume, Clarifier, Mode Select, Memory Write, VFO\/Memory tuning select, Tuning Rate Speed
\n15 programmable memories
\nCircuit: Synthesized 45-75 MHz local oscillator, 45 MHz first I-F, 455 kHz second I-F
\nSensitivity: AM mode, 2.5 uV for 10 dB SNR at 30% modulation, SSB\/CW mode, 0.5 uV for 10 dB SNR
\nSelectivity: 4 kHz @ -6 dB
\n6 digit green LED frequency\/memory display with mode indicators
\nPower supply: 12-15 Vdc, 250 mA current consumption with no signal present. 15 Vdc @ 800 mA wall transformer for 110 VAC operation included with kit.
\nAntenna connector: 50 ohm input, RCA-style female phono jack
\nAudio: 1.5 watts audio output to internal speaker, plus 1\/8 inch front panel stereo phone jack for headphones or external speaker
\nSemiconductors: 10 IC’s, 26 transistors, 16 diodes
\nCompact size: 2.25″ x 6.5″ x 6.5″ HxWxD
\nConstruction: Steel clamshell case, aluminum chassis, plastic molded front panel. Speaker inside top of steel clamshell, top-firing<\/p>\n
Price: $195<\/p>\n