![\"\"](\"https:\/\/www.cqdx.ru\/ham\/wp-content\/uploads\/2012\/03\/IPS-12-40_xlrg.jpg\" "\\"IPS-12-40_xlrg\\"")
<\/a><\/p>\nDescription<\/strong> A precision regulated power supply\/charger, back-up battery, low voltage battery disconnect, output metering, LED status and Form C alarm contacts are all pre-wired and calibrated within the unit for plug-and-play operation. Plug-in terminals are provided for easy wiring of an additional parallel rectifier input, or external batteries for increased back-up capacity.<\/p>\n The batteries are always in-line with the load, thus there is no interruption from relays or transfer switches in the event of AC loss. Batteries are recharged when AC is restored. A manual battery disconnect switch allows internal or external battery service or replacement while the system is running. Models available for -48, +24 and +12 volt applications.<\/p>\n Features<\/strong> Specifications:<\/strong><\/p>\n AC Input<\/strong> DC Output<\/strong> Power Scaling via Back Panel Quick Connects<\/strong> Environmental<\/strong> Mechanical<\/strong> Protection<\/strong> Internal Batteries<\/strong>
\nThe Integrated Power System (IPS) is a unique multifunction power supply which incorporates built-in battery back-up and numerous power accessories within a single 2RU (3.5″) chassis, thus eliminating time-consuming system integration, component sourcing and installation, while saving precious rack space–ideal for any low-to-medium power application requiring AC fault tolerant operation.<\/p>\n
\n\u2022 Precision regulated power supply simultaneously maintains batteries at peak charge and supplies
\nsystem load.
\n\u2022 Built-in batteries instantly power load during AC failure–no switch-over delay. 3-5 year average life.
\nTerminals provided for additional external batteries for increased back-up capacity.
\n\u2022 Terminals provided for easy addition of parallel rectifier. (48V and 24V models only)
\n\u2022 Automatic low voltage and manual battery disconnect.
\n\u2022 Numerous front panel monitors–L.E.D. status indicators and digital ammeter\/voltmeter.
\n\u2022 Form C summary failure alarm contacts; loss of internal rectifier output, loss of external rectifier
\noutput, LVBD contactor open. AC input failure alarm contacts optional.
\n\u2022 Numerous protection features–AC input breaker, internal battery breaker, auto thermal
\nshutdown\/recovery, current-limiting, short-circuit and over-voltage protection.
\n\u2022 19″ or 23″, 6\u201d forward rackmount brackets provided<\/p>\n<\/a><\/p>\n
\nInput Range (switch selectable):
\n115V = 92-130 VAC
\n230V = 184-260 VAC
\nFrequency: 47-63 Hz<\/p>\n
\nVoltage\/Amperage: See Matrix above
\nMaximum Load with External Rectifier and Battery Inputs: 40 amps
\nRegulation: Line: \u00b1 1 %, Load: \u00b1 2 %
\nRipple: \u00b1 1 %<\/p>\n
\nExternal Rectifier Input: 24V, 48V only; 560 or 1,000 watt (see PM Series)
\nExternal Battery Bank: 12V\/24V\/48V<\/p>\n
\nTemperature Rating: -10\u00b0 to + 60\u00b0 C; Derate linearly from 100% load @ 50\u00b0 C to 75% @ 60\u00b0 C<\/p>\n
\nChassis: Aluminum
\nRack Size: 19″ or 23″, 2 RU (3.5″)
\nCooling: Forced Air
\nDimensions: 3.5″H x 17″W x 18″D
\nWeight: 33 Lbs. (with batteries), 17 Lbs. (without batteries)<\/p>\n
\n\u2022 Current Limit, Short Circuit
\n\u2022 Over Voltage
\n\u2022 Auto Thermal Shutdown\/Recovery
\n\u2022 Input Fuse and Circuit Breaker
\n\u2022 Circuit Breaker For Internal Battery
\n\u2022 Low Voltage Battery Disconnect (Adjustable)<\/p>\n
\nType: 12 Volt, 5 A-H Sealed Lead-Acid, Maintenance-Free
\nAmp-Hour Capacity: See Matrix below
\nWeight: 4 Lbs. each; 4 Batteries per Unit
\nApprovals: UL Recognized, DOT and IATA, approved for shipment by air<\/p>\n