{"id":33981,"date":"2012-09-15T00:00:51","date_gmt":"2012-09-14T22:00:51","guid":{"rendered":"http:\/\/www.cqdx.ru\/ham\/?p=33981"},"modified":"2023-09-24T16:11:00","modified_gmt":"2023-09-24T16:11:00","slug":"rc-28-ip-remote-control-system","status":"publish","type":"post","link":"https:\/\/www.cqdx.ru\/ham\/new-equipment\/rc-28-ip-remote-control-system\/","title":{"rendered":"RC-28 IP Remote Control System"},"content":{"rendered":"

The RC-28 IP Remote Control System, allows Radio Amateurs to remotely operate selected Icom amateur transceivers. The software comes complete with remote control USB encoder and will work with the IC-7200, IC-7410, IC-7600 and IC-9100 with a USB cable, and with the IC-756PROIII, IC-7000, IC-7400, IC-7700 and IC-7800 with a RS-232C cable.
\n<\/strong><\/p>\n

\"\"<\/a><\/p>\n

MAJOR SELLING POINTS<\/strong><\/p>\n

– The RC-28 IP Remote Control System allows you to use the radio installed in another room using your home network or even from a remote location over the Internet.<\/p>\n

– Low voice latency (caused by the RS-BA1) provides the same operational experience as using an actual radio.<\/p>\n

– The remote control USB encoder provides control of this system. It utilises the same tuning knob and encoder used on Icom HF radios, providing a tactile option for the RS-BA1 software. Includes a sturdy PTT and two user-programmable function keys.<\/p>\n

Advanced Remote Control Interface Tailored to Icom Transceivers<\/strong><\/p>\n

– Most functions and modes of your transceiver, including interference rejection functions and IF filter settings, can be controlled. Also, S-meter and SWR can be observed.<\/p>\n

– Rx Voice recording function.<\/p>\n

The RS-BA1 software itself consists of two component software applications; System configuration software and remote control software. The system configuration software sets up IP address, audio sampling rate and other settings. The remote control software provides a user interface, similar to the radio’s front panel, and allows you to control the radio from a remote location.<\/p>\n

Connection with the IC-7600, IC-7410, IC-7200 or IC-9100<\/strong><\/p>\n

The IC-7600, IC-7410, IC-7200 or IC-9100 can be connected to a PC with a USB cable and the input\/output audio signal and CI-V command is sent through the USB cable.<\/p>\n

Connection with the IC-7700 & IC-7800<\/strong><\/p>\n

The IC-7800 or IC-7700 can be connected to a PC with a RS-232C cable plus S\/P DIF or ACC cable. *<\/p>\n

Connection with the IC-756PROIII, IC-7400 or IC-7000<\/strong><\/p>\n

The IC-756PROIII, IC-7400 or IC-7000 can be connected to a PC with an audio cable and RS-232C cable through CT-17 CI-V level converter.*<\/p>\n

*RS-BA1 operation with the Base station’s PC connected to the radio’s ACC socket, MIC connector, or S\/P DIF jack for audio communication cannot be guaranteed. Depending on your radio, a few functions or modes cannot be used, or you need to update the radio’s firmware to operate the CW keyer, using the RS-BA1.<\/p>\n

Supplied items<\/strong>
\n– Remote Control USB Encoder
\n– CD (including the RS-BA1 instruction manual, the RS-BA1 installer, the USB driver and the USB driver installation guide)
\n– USB cable (A-B type)
\n– Installation guides<\/p>\n

Specifications:<\/strong><\/p>\n

\n