{"id":42330,"date":"2015-01-07T00:00:02","date_gmt":"2015-01-06T22:00:02","guid":{"rendered":"http:\/\/www.cqdx.ru\/ham\/?p=42330"},"modified":"2023-10-06T17:52:49","modified_gmt":"2023-10-06T15:52:49","slug":"kc901h-analyzer","status":"publish","type":"post","link":"https:\/\/www.cqdx.ru\/ham\/new-equipment\/kc901h-analyzer\/","title":{"rendered":"KC901H Analyzer"},"content":{"rendered":"

KC901H Analyzer<\/p>\n

\"901\"<\/a><\/p>\n

Main Features:<\/strong>
\n– Transmission test (tuning diplexer and filter, testing amplifier and inspecting the directivity of antennas)
\n– Reflection test (examining quality of antenna system and feeder system, a tracking receiver is used to improve the noise performance)
\n– Spectrum display and field strength detection (inspecting radio frequency emissions \/ searching interference sources)
\n
\nApplications:<\/strong>
\nKC901H is designed for debugging RF devices, such as diplexer, filter, amplifier, splitter, combiner, and testing standing wave of antennas and insertion loss of feeders.
\nTo test a transmitter or receiver, add external attenuator to extend input power range
\nPerform field strength measurement and interference detection in most frequencies.
\nDetect the fault point of cables \/ speed factor measurement.
\n
\nA standard packing includes: <\/strong>
\nKC901H analyzer 1
\nCharger 1
\nStrap 1
\nUser manual 1
\nDELUXE kit plus
\nCar charger
\nFilter kit
\nRF adapter kit
\n3-Year warranty
\nsize\uff1a230\u00d7113\u00d746mm\uff08length, width , height \uff09
\nweight\uff08including battery\uff09\uff1aNet weight of host <1.5kg
\nTotal weight \u22482.0kg<\/p>\n

Frequency range:<\/strong>
\nTransmission test 100 KHz\u20263GHz (0\u2026100 kHz is allowed)
\nReflex test 1.5MHz\u20263GHz (0\u20261.5MHz is allowed)
\nOutput level (typical value):+7dBm or 5mW\uff081MHz\u2014\u20142GHz\uff09
\n+0dBm\uff082\u2014\u20143GHz\uff09<\/p>\n

Input sensitivity:<\/strong>
\nsuperior to -107dBm or 1\u03bcV\uff0850KHz\u2014\u20141GHz\uff09
\nsuperior to -87dBm or 10\u03bcV\uff081\u2014\u20142.2GHz\uff09<\/p>\n

Damaged level:<\/strong>
\nall the RF ports DC15V\uff0c+20dBm<\/p>\n

Test range 0f S21 (typical value):<\/strong>
\n110dB\uff081MHz\u2014\u20141GHz\uff0cabout 60dB in 100KHz \uff0c about 120dB in 435MHz\uff09
\n80dB\uff081\u2014\u20142.2GHz\uff09\uff0c60dB\uff082.2\u2014\u20142.5GHz\uff09<\/p>\n

\"DSC_0598\"<\/a><\/p>\n

Resolution:<\/strong>
\nFrequency is 1Hz, level is 0.1 dB
\n(Typical value,@25\u2103,battery voltage\u22657.5V)
\n\u00b11.5dB\uff08spectrum measurement\uff0cREF=20dBm\uff09
\n\u00b13dB\uff08spectrum mode and field mode\uff09\u00b1\uff081+0.05L\uff09dB\uff08in S21test\uff0cwhen calibration is directly connected and insertion loss L\u226460dB\uff09
\n+2dB\uff0c-3dB*\uff08loss\uff0csimple calibration, 25MHz\u2264f\u22641GHz\uff0c6dB\u2264RL\u226418dB\uff09
\n*No guarantees. Use external bridge to meet more requirements referring to 5.2.5
\n
\nInternal bridge directionality\uff08typical value\uff09\uff1a<\/strong>
\n18dB\uff083MHz\u2014\u201415MHz\uff0c1.2GHz\u2014\u20142GHz\uff09
\n30dB\uff0815MHz\u2014\u20141.2GHz\uff09
\n16dB\uff082GHz\u2014\u20143GHz\uff09<\/p>\n

Frequency stability:<\/strong>
\n\u00b11ppm\/year
\nSupply voltage:
\n11.5V\u202632V\uff08external power \uff09\uff1b7.2\u20268.4V\uff08battery\uff09
\n105V\u2026230V\uff0c50\/60Hz\uff08power adapter input\uff09
\nBattery endurance\uff1a
\n3hours \uff08spectrum ,field, signal source\uff09\uff1b1hour \uff08S21 or S11 includes insertion loss test\uff09
\n20hours \uff08in STOP mode\uff0cBL=1\uff09<\/p>\n

Humiture range\uff1a<\/strong>
\n0\u202645\u2103\uff08normal temperature range \uff09
\n10%\u202690%R.H.\uff0cno condensation
\nsize\uff1a
\n230\u00d7113\u00d746mm\uff08length, width , height \uff09
\nweight\uff08including battery\uff09\uff1aNet weight of host <1.5kg
\nTotal weight \u22482.0kg<\/p>\n

USER MANUAL<\/a><\/p>\n

Link<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

KC901H Analyzer Main Features: – Transmission test (tuning diplexer and filter, testing amplifier and inspecting the directivity of antennas) – Reflection test (examining quality of antenna system and feeder system, a tracking receiver is used to improve the noise performance) – Spectrum display and field strength detection (inspecting radio frequency emissions \/ searching interference sources)…<\/p>\n","protected":false},"author":2,"featured_media":42331,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","_links_to":"","_links_to_target":""},"categories":[8],"tags":[304],"class_list":["post-42330","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-new-equipment","tag-new-equipment-2","category-8","description-off"],"_links":{"self":[{"href":"https:\/\/www.cqdx.ru\/ham\/wp-json\/wp\/v2\/posts\/42330","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.cqdx.ru\/ham\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.cqdx.ru\/ham\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.cqdx.ru\/ham\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.cqdx.ru\/ham\/wp-json\/wp\/v2\/comments?post=42330"}],"version-history":[{"count":0,"href":"https:\/\/www.cqdx.ru\/ham\/wp-json\/wp\/v2\/posts\/42330\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.cqdx.ru\/ham\/wp-json\/wp\/v2\/media\/42331"}],"wp:attachment":[{"href":"https:\/\/www.cqdx.ru\/ham\/wp-json\/wp\/v2\/media?parent=42330"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.cqdx.ru\/ham\/wp-json\/wp\/v2\/categories?post=42330"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.cqdx.ru\/ham\/wp-json\/wp\/v2\/tags?post=42330"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}