{"id":43684,"date":"2016-04-24T00:00:38","date_gmt":"2016-04-23T22:00:38","guid":{"rendered":"http:\/\/www.cqdx.ru\/ham\/?p=43684"},"modified":"2023-09-24T16:10:46","modified_gmt":"2023-09-24T16:10:46","slug":"ld-5-qrp-hf-transceiver","status":"publish","type":"post","link":"https:\/\/www.cqdx.ru\/ham\/qro-qrp\/ld-5-qrp-hf-transceiver\/","title":{"rendered":"LD-5 QRP HF Transceiver"},"content":{"rendered":"

\"Screen<\/a><\/p>\n

\"Screen<\/a><\/p>\n

\"5a8de3967630bd3502eb9bd9392c095b\"<\/a><\/p>\n

One of the hottest new QRP Transceivers on the market. This powerful unit packs in a ton of features at an incredible value. This rig has a sleek design with a simple interface that you will want with you at all times. Just wait until you hear the amazing receive!<\/p>\n

Transmitter<\/strong>
\nInput Power: 10.5-13.8 VDC
\nOutput Power: 3.5 \u2013 8W
\nMeasurement: SWR and Power:Numbers or Bar indicators on display
\nSupply Voltage:Real voltage on display
\nTwo Modes CW: Select Straight Key or Paddle<\/p>\n

Receiver<\/strong><\/p>\n

Receive sensitivity: 0.2uV Preamp
\nAnt Preamp: +12 dB
\nSpurious Response Rejection: IMD3 -48Db\/ 5W
\nIMD5 -43dB
\nATT: -6db<\/p>\n

Specifications:<\/strong>
\nFrequency Range: 7000 kHz \u2013 22 MHz 40, 30, 20, 17 and 15 meter operation
\nModes: USB, LSB, CW, CW-R, DIGITAL DATA:CAT \u2013USB jack : CW, PSK, RTTY, SSTV \u2013 3.5mm jack
\nPower: 5W output in CW \/ SSB
\nFrequency Stability: +\/- 3 ppm (Si570 defined) typical over 0-50 deg C
\nSupply Voltage: 10.5V min to 15V max 350mA receive and 1.5 to 2A typical in transmit
\nLO temp. Stability: +\/- 2.5
\nAntenna: 50 ohms BNC
\nDual VFO
\nMemory: 100 memory storage per band Memorize frequency, mode, VFO\u2019s
\nBuilt-in speaker: 0.2 watts
\nDimensions: 4.724\u201dL X 3.937\u201dW x 1.957\u201cH
\nWeight: 19oz\/0.54k\/excl. mic.
\nIambic key: Mode A and Mode B
\nPitch CW: Controls CW offset. The sidetone pitch is automatically set to equal the offset
\nNotch Filter: Automatic Heterodyne filter for SSB from -6 to -40 db
\nNoise reduction: Level of attenuation of the noise from 1 to 50- use minimal necessary
\nNoise Blanker: Adjusted in the range from value 4 to 12 readings depending on interference
\nCW VOX: Break in delay in CW \u2013 adjustable from 0.1 seconds to 5 seconds
\nCW memory keyer Choose Iambic Mode A or B
\nVOICE VOX VOX Delay adjustable from 0.1 seconds to 5 seconds
\nSSB VOX Level: VOX GAIN 10-100 10 IS MOST SENSITIVE
\n8 Different filters (incl): 4 of 4 for CW\/ SSB – 1-3 factory presets \u2013 No.4 adjustable for CW\/50-1000Hz\/ and SSB\/250-3.6KHz
\nCompressor SSB: 0-20dB
\nSSB TX MUTE Enable= no monitor Disable= monitor<\/p>\n

1 Year Factory Warranty<\/p>\n

LD5 5-band SDR\/DSP SSB\/CW Xcvr - First Impressions<\/div><\/div>
<\/div>
<\/div>
<\/div><\/div><\/div>