{"id":44035,"date":"2016-07-12T13:55:07","date_gmt":"2016-07-12T11:55:07","guid":{"rendered":"http:\/\/www.cqdx.ru\/ham\/?p=44035"},"modified":"2023-09-24T16:10:45","modified_gmt":"2023-09-24T16:10:45","slug":"acom-1010-160-10m-hf-linear-amplifier","status":"publish","type":"post","link":"https:\/\/www.cqdx.ru\/ham\/qro-qrp\/acom-1010-160-10m-hf-linear-amplifier\/","title":{"rendered":"ACOM 1010 160-10m HF Linear Amplifier"},"content":{"rendered":"

\"ACOM1010\"<\/a><\/p>\n

Features:<\/strong><\/span><\/p>\n

Easy operation.<\/strong>
\nThe plate-load True Resistance Indicator (TRI) is an ACOM innovation that provides quick and precise tuning, typically in less than 10 seconds. The auto-operate function will return the amplifier to the OPERATE mode automatically after each protection trip, saving time and avoiding manual switching.<\/p>\n

No tuner needed.<\/strong>
\nNo external antenna tuner is required as long as the antenna VSWR is 3:1 or lower. The amplifier will perform the functions of an antenna tuner, enabling you to change antennas faster and use them over wide frequency ranges.<\/p>\n

A durable amplifier.<\/strong>
\nThis amplifier is both user-friendly and self-monitoring. It is designed to safely withstand up to 240 W of reflected power, up to 100 milliseconds of drive spikes (RF \u201ctails\u201d after a PTT or KEY release), and even operator tuning errors. It is also capable of operating at more than half its designed output power at only 75% of nominal line (mains) voltage. Because it can tolerate deep voltage drops (down to zero for 10 milliseconds) and 15% line voltage spikes, it is particularly suited for use in portable environments, such as field days and DXpeditions.<\/p>\n

LED bar-graph display.<\/strong>
\nThe upper LED bar-graph always reads peak forward power while the lower LED bar-graph is for the reflected power. LED warning indicators are provided for abnormal conditions of grid 1, grid 2, and plate parameters.<\/p>\n

Antenna selection.<\/strong>
\nTwo antenna outputs are selectable on the front panel of the amplifier.<\/p>\n

Efficient tuning.<\/strong>
\nAntenna matching can be achieved in less than 10 seconds and at a quarter of nominal output power, which produces lower risk of interference to other stations and greater safety to the amplifier components.<\/p>\n

Transceiver-independent.<\/strong>
\nThe amplifier operates without special signaling from the transceiver; it needs only \u201cground on TX\u201d and 60 W RF drive power to operate at full output power.<\/p>\n

Input matching.<\/strong>
\nBroadband input matching circuitry offers excellent loading characteristics for the driving transceiver, from 1.8MHz to 30MHz.<\/p>\n

Single tube operation.<\/strong>
\nA single Svetlana 4CX800A (GU74B) high-performance ceramic-metal tetrode with plate dissipation of 800W (forced air cooling, grid-driven) is used for maximum efficiency.
\n
\nPermanent monitoring and protection
\nof the plate and grids currents.<\/strong>
\nThe Bias Optimizer minimizes heat dissipated by the tube, assuring tube longevity.
\n
\nHigh voltage protection.<\/strong>
\nDesign of the high-voltage power supply eliminates the danger of turn-on transients affecting sensitive devices connected to the same line (mains) circuit. Moreover, the amplifier can be configured to accommodate any of 8 nominal line voltages between 100 and 240 V, 50 or 60 Hz.<\/p>\n

Band inclusion.
\nThe amplifier can be shipped with 10 and 12-meter capability disabled as required by the Federal Communications Commission (FCC), for United States users. Contact your dealer about enabling those bands.<\/p>\n

\"1010top\"<\/a><\/p>\n

Specifications:<\/strong><\/span><\/p>\n

\n
\n
\n
\n
\n