Tag " energy"

Description: The high power combiner OM10C is designed for all short wave amateur bands from 1.8 to 29.7 MHz and maximum 10kW PEP output power. Specification of OM10C: Frequency coverage: 1.8 – 29.7 MHz continuous Power rating: 10 kW PEP or continuous carrier into a matched load (VSWR below 1.2:1). Reduce the output at increased VSWR, linearly down to 5 kW at VSWR up to 2:1 Input...


Continue Reading »

he automatic linear amplifier OM3501A is designed for all short wave amateur bands from 1.8 to 29 MHz (including WARC – bands) and all modes. It is equipped with a one piece of ceramic tetrode GU78B.   The advantages of OM3501A: Full compatibility with TRXs-CAT - ICOM - YAESU - ELECRAFT - Ten-Tec Orion - Kenwood - Icom transceive protocol using by microHAM devices...


Continue Reading »

Specifications: Manufacturer's Part Number: 500S DXE Part Number: AOM-500S Line Cord NEMA Plug: No USA AC plug provided Amplifier Type: Solid state Amplifier Band Coverage: 160-4 meters Amplifier Power Output PEP: 500 watts Amplifier Input Power: 25 watts Amplifier Supply Voltage: User determined Maximum Line Current: User determined External Power Supply: No Amplifier Width: 11.457...


Continue Reading »

MERCURY LUX LDMOS HF Linear Amplifier / ATU: Features: Operating Bands 160m – 6m (Ham Bands) RF Auto Band Decoding Band Data (CAT) For Many Brands 7-inch Color TouchScreen Remote Connection To PC 2 x BLF188 LDMOS with KoolPlusTM 1500 Watts SSB/CW 800 Watt DIGI Mode Input Power 30-50 Watts FWD/REF/SWR Meter DI Voltage/DI Current Meter All Protections Cortex-M7 at 600 MHz Processor Selection...


Continue Reading »

Easy to operate The overall operation of ACOM 2020S is extremely simplified: the touch screen menus are intuitive and easy to follow, no special skill is required from the operator when changing frequency bands. User-friendly automatic control When connected to a transceiver with CAT capability, the amplifier will track the operating frequency, and will change bands accordingly. Even if not CAT connected,...


Continue Reading »

httpvh://youtu.be/x3qQQP22VVY Take your contesting experience to the next level with the latest LDMOS power device with features supporting a SO2R operation in one amplifier. Features: 1kW output at fully duty cycle, even for extended periods of time Six antenna connectors allow customers to use a variety of antennas for multiple bands Connect to an ICOM radio and all settings are automatically...


Continue Reading »

General Features: Output Power 1.8 – 30 MHz   2K+, 6m 1K+ Device: 2x BLF189XR Auto Band Selection ICOM®; YAESU® Band data Interface CAT Connectivity LAN Connectivity Wi-Fi Connectivity Quiet Internal PSU 110-260V AC / 3KW up to 1K at 110V AC; full power at 230V AC internal Automatic Antenna Tuner (optional) 1x TRX and 4x Antenna Precise power meter from...


Continue Reading »

1.8-70MHz Solid State Linear Amplifier 1200W output 1.8-30MHz (1000W 50MHz, 500W 70MHz) Drive level 50W (10W/25W optional) Fully automatic band selection 3 antenna sockets Vacuum relay QSK switched Dual BLF188XR LDMOS Touch screen full colour display Network connected remote operation Quiet temperature controlled fans +10dBm pre-distortion output 100-260V...


Continue Reading »