Tag " QRO/QRP"
22
May
MAIN FEATURES:
• Powerful: up to 1.5 KW (1.3 KW typ.).
• Very Light: 7.5 Kg. (16.5 Ibs) typ.
• Very Small: h 12, w 28, d 36 cm (4.72”x11.02”x14.17”) connectors included.
• Wide Frequency Coverage: 1.8 MHz to 50 MHz, including WARC
• Internal Switching Power Supply with Power Factor Correction.
• No jumper changes necessary to work from 100VAC to 255VAC
• Manages 4 antennas...
Continue Reading »
Continue Reading »
26
Apr
20
Apr
Like its predecessor DL2K, the Palstar DL5K was born out of the need for a dummy load that allows for more time to tune your amp at high power. Most dummy loads don't have the real world power load capability needed by Ham operators who run high-power amplifiers. The Next-Generation Palstar DL5K Dummy Load for amateur radio can handle a full 5000W for up to a half a minute and 1000W continuously....
Continue Reading »
Continue Reading »
06
Apr
Photo by Youkits
Photo by Youkits
DDS controlled, Minature LCD display with frequency
Power: 5W output
Kit A TX: 5-15MHz, covering 60m, 40m, 30m, 20m band RX:3-18MHz
Kit B TX: 18-30MHz covering 17m,15m,12m,10m band RX:14-30MHz
1Hz, 10Hz, 100Hz, 1KHz, 10KHz, 100KHz tuning rate available
Dual VFO with 40 memories
Memory transfer to VFO
One tuning knob plus 4 keys to realize all functions...
Continue Reading »
Continue Reading »
15
Mar
Photo by KC8IV
Heathkit SB240 2kw amplifier. What! You say you never heard of a Heathkit SB240 amp. Well you and most of the ham radio operators around the world never heard of this amp, and there is a story behind it. This is a very, very, very, rare piece of Heathkit history.
Photo by KC8IV
First let us tell you about the amplifier and some of it's very unique features, that placed this...
Continue Reading »
Continue Reading »
07
Mar
New QRO Chinese Zhong Xing automatic HF Linear Amplifier "HF2013DX-A".
Photo by Zhong Xing
Important safety instructions:
--The amplifier contains high voltage circuits. Never turn the amplifier on without the upper lid in place.
--The amplifier is neither to be used in a wet or humid environment nor to be exposed to rainfall.
--The amplifier must be installed in such a way that free flow...
Continue Reading »
Continue Reading »
