Tag " QRO"

On August 31, 2019, Icom Co., Ltd. announced the IC-PW2 - 1kW linear amplifier in the HF + 50MHz band at its booth at Ham Fair 2019. Full power, full duty specification that uses LDMOS for the final output and 1kW output even for long-term transmission, equipped with an antenna selector that can connect two exciters and six antennas, one SO2R (Single Operator two Radios) Corresponding to. It is said...


Continue Reading »

The high power combiner OM10C is designed for all short wave amateur bands from 1.8 to 29.7 MHz and maximum 10kW PEP output power.   Specification of OM10C: Frequency coverage: 1.8 – 29.7 MHz continuous Power rating: 10 kW PEP or continuous carrier into a matched load (VSWR below 1.2:1). Reduce the output at increased VSWR, linearly down to 5 kW at VSWR up to 2:1 Input...


Continue Reading »

The OM Power model OM4001A is an automatic power amplifier, designed for use on all short wave amateur bands from 1.8 to 29.7 MHz (including WARC bands) and all modes. It is equipped with a two pieces of ceramic tetrode FU728F.   The advantages of OM4001A: Full compatibility with - ICOM - YAESU - ELECRAFT - Ten-Tec Orion - Kenwood - Icom transceive protocol using by microHAM...


Continue Reading »

"BURST-2000A" - Russian LDMOS HF Linear Power Amplifier - 2,2 KWT. 1.8 - 50 MHz. with (CWS) cooling water system. Video (Russian Language) httpvh://youtu.be/WcTO8SejTCM Exclusive photos (Copyright CQDX.ru) Exclusive photos (Copyright CQDX.ru) Exclusive photos (Copyright CQDX.ru) Exclusive photos (Copyright CQDX.ru) Exclusive photos (Copyright CQDX.ru) The...


Continue Reading »

The linear amplifier OM1000+ is designed for all short wave amateur bands from 1.8 to 29 MHz (including WARC – bands) + 50 MHz and all modes. It is equipped with a ceramic tetrode GS-23B. Specifications: Frequency coverage: Amateur bands 1.8 – 29.7 MHz including WARC + 50 MHz Power output: 1200+W PEP in SSB, 1000W CW on HF bands, 1000W PEP SSB, 800W CW on 50 MHz, ...


Continue Reading »

The high power combiner OM10C is designed for all short wave amateur bands from 1.8 to 29.7 MHz and maximum 10kW PEP output power. Frequency coverage: 1.8 – 29.7 MHz continuous Power rating: 10 kW PEP or continuous carrier into a matched load (VSWR below 1.2:1). Reduce the output at increased VSWR, linearly down to 5 kW at VSWR up to 2:1 Input impedance: 50 Ohm unbalanced, input UHF SO239...


Continue Reading »

FEATURES: Five inch (5”) (108x65mm) high resolution color display, 800x480 pixels and 24-bits colors. The final stage uses field effect (MOSFET) transistors type BLF188 from NXP, designed to withstand high mismatch (SWR) at the output and intended for operation in aerospace, industrial, mobile, and radio broadcast applications. Compatible with all transceiver models available...


Continue Reading »

Specification: 300W • -60dB Powerful: solidc 1.5kW in on on all modes. Very Light: about 10 kgs (about 22 lbs). Very Small: H 12, W 28, D 36 cm. (4.72" X 11.2" X about 17", connectors included). Wide Frequency Coverage: 1.8 mHz to 54 mHz, including WARCs. Where permitted: 60m. full power and 300W on 4m. (70mHz). Internal Switching Power Supply with Power Factor Correction. ...


Continue Reading »