Chinese “MALAHIT” SDR DSP Receiver

2nd Upgraded Generation “Malahit-DSP2” SDR Radio Receiver 10kHz-380MHz 404MHz-2GHz Built-in 5000mAh Battery – Silver Features: Experience clear audio with the DSP2 Second Generation Malachite set. Its adjustable filter width, adaptive noise reduction, and threshold noise cancellation ensure an immersive listening experience. Made from durable aluminum alloy, this portable radio features a wide frequency of 10kHz…

Adalm Pluto original KIT

Using SDR TRX for VHF/UHF QO-100 Geo-Satt. SDR TRX Measurement tool VNA, Spectrum analyser RF generator DVB-S TRX Parameters Portable self-contained RF learning module Cost-effective experimentation platform RF coverage from 325 MHz to 3.8 GHz (70 MHz to 6 GHz) Up to 20 MHz of instantaneous bandwidth Flexible rate, 12-bit ADC and DAC Up to…

SDR Receiver Using a Tayloe Quadrature Detector

Simple SDR Receiver that can receive frequencies up to approximately 30MHz, if an optional Si5351 clock generator is used. Without this, it receives up to about 20MHz, using the ESP32 clock dividers. The circuit is so simple that it can even be built on a breadboard. Tayloe Quadrature Detector circuit on a solderless breadboard Circuit…

3-way active splitter in BOX by QRZ.cz

This active splitter allows you to split one antenna into multiple RX. The splitter can also be used to split a reference frequency, for example 10MHz. The outputs have high isolation and minimal difference in splitting. The input includes a diode limiter and the preamp gain can be varied by an output attenuator. This 3-way active splitter…