AURSINC Portable TinySA Spectrum Analyzer – Updated Frequency Analysis V0.3.1 | Input 100 kHz to 960 MHz MF, HF, VHF UHF | ESD Protection Function and Touchscreen & 2.8 Inch.
- [Upgraded Version 2021:ESD Protection Diodes] Tinysa with the latest V0.3.1 firmware, the information displayed is “against ESD-protected”, which means that the diodes are installed, which is more stable and sensitive with a higher anti-static level and longer service life.
- [Frequency range] Spectrum analyzers use a resolution filter used to isolate the input power in a small frequency range. This resolution filter returns to the desired frequency range. The fastest scan speed occurs in RBW or 300 kHz or higher and is about 2 scans per second. Tinysa with two inputs, high quality MF/HF/VHF input for 0.1 MHZ-350 MHz, UHF input for 240 MHz-960 MHz
- [2-in-1 device] If it is not used as a spectrum analyzer, it can be used as a signal generator, MF / HF / VHF sine wave output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator used for automatic self-testing and low input calibration. The TinySA contains all the components of a conventional heterodic spectrum analyzer
- [4 modes for input/output specification] TinySA input/output specification is divided into 4 modes: low input, high input, low output, high output mode. The user can update TinySA firmware. New firmware versions are required, please contact seller to get the download link
- [PC control] The USB interface implements the serial over USB (CDC) protocol and there are a large number of commands that can be called through the serial interface. This command can be used to update measurements or internal settings. The Windows controller is automatically installed after it has been connected to a Windows PC. The Linux controller is integrated into the kernel. Two software to control the TinySA are available.
Price: € 87.72