Titan SDR receivers are designed to monitor, analyse (decode) and record a large number of frequencies at the same time. Thestandard version of teh Titan SDR can use 8 channels in parallel, the Titan SDR Pro version can handle up to 40 channels at the same time. This greatly simplifies monitoring station which used to…
Overview The USRP E310 pocket sized, stand-alone software defined radio provides 2×2 MIMO support covering 70 MHz – 6 GHz and up to 56 MHz of instantaneous bandwidth. At roughly the footprint of a mobile phone, with a typical power consumption of 2-6 watts, the USRP E310 is ideal for mobile and embedded applications with…
The DX-Patrol is a Software Defined Radio (SDR) receiver with a very wide receiving frequency range. In contrast to the usual cheap USB DVB-T sticks this receiver has an additional converter for shortwave. This is the reason for the wide frequency range from 100 kHz to 2000MHz. For operation with the HF converter additional bandfilters…
ANAN-10E HF + 6M 10W All Mode Transceiver. Description: Differences between the ANAN-10 & the ANAN-10E 1. The ANAN-10E uses a 14 bit ADC while the ANAN-10 uses a 16 bit ADC 2. The ANAN-10E uses an EP3C25 FPGA while the ANAN-10 uses a larger EP3C40 3. The ANAN-10E supports 2 receivers while the ANAN-10…
Version 3.1 Version 3.1 If you are a FCD owner I am sure you are a very satisfied with the quality and performance receiving satellites and all sorts of communications in VHF and UHF. However, the FCD only starts receiving properly from 64Mhz up, and misses all the good fun that is receiving HF and…