The ultimate QRSS Transmitter Kit is produced by Steve G0XAR and Hans G0UPL in 30, 40 and 80m versions. The kit contains the PCB, LCD, programmed microcontroller and all board-mounted components. Download the instruction manual using the link above. The PCB is quite compact and moderate care is required in the construction. A rich array…
DetailsApparently there’s a retro vogue going on in the design world when it comes to appliance, power cords. Shown here, a selection of colorful braided fabric cable looms available from Sweden’s FRINAB Fristad Industri Aktiebolag. The cable is available in small quantities, online through their NUD Collection brand, which includes a webshop that will sell…
DetailsDIY Project: TT1A 2 Band CW transmitter kit. Introduce price is only $129! Working on 40M and 20M, (optional 15M). Output: 4W. Power supply need: 200-250V 100ma, 6.3V 2A. Enjoy building this 2-band CW tube transmitter, watching the comforting glow from the tube pumping out 4W, only a weekend’s work. Install in custom made enclosure…
DetailsOverview OpenBeacon is an open source crystal-controlled QRPp beacon transmitter kit which can output a variety of slow-speed modes, including QRSS, DFCW, and Sequential Multi-tone Hellschreiber. It is configured via USB port, so there are no jumpers to set and you can easily adjust all of the operating parameters via command line. Once configuration is…
DetailsWhat is nanoKeyer? The nanoKeyer is an Arduino Nano based CW Contest Keyer Addon. It was designed specifically for use with the K3NG Arduino keyer open-source firmware adding many features and flexibility. The nanoKeyer is suitable as a standalone keyer or for keying the radio via the USB port by using the K1EL Winkeyer protocol from a connected computer…
Details
